TinkSeal™
YAMAHA - POLYUREA SUBSTITUTE Substitute 4oz
 
Lasts far longer than polyurea grease, longer service intervals! The YXZ axle service is supposed to be regreased every 600 miles, although some drivers have gone as far as 5000 miles after servicing with TinkSeal.
 
YouTube Video:
Yamaha YXZ 1000R rear driveshaft lubrication service
https://www.youtube.com/watch?v=hMw4e-mqiLo
 
TinkSeal™ is Not a grease and that is why it works so well for this application. TinkSeal is made from both liquid and dry lubricants combined at an elevated temperature under pressure. It's a carrier system to get lubrication to the area where it is needed. It's not just a substitute for Yamaha Ultramatic grease, its a superior product. TinkSeal™ outperforms Yamaha's Ultramatic grease in every area!
 
Lower friction resistance than Yamaha brand Polyurea Grease
 
Can be used on all primary and secondary sliding surfaces (Yamaha brand requires the purchase of multiple grease products for their solution)
 
Increases the interval times between sheave maintenance and cleaning
 
Ultra High Pressure Lubricating Grease with Nano particle transfer
 
Patent Pending
 
** If needed quickly, I strongly urge you choose to ship USPS Priority mail. Or purchase two and I will upgrade shipping for free.
 
TinkSeal was originally designed to lubricate between rubber/plastic surfaces and metal. Most lubricants simply cannot do this and will actually soften or dissolve some plastics. Lubricants typically allow two metal surfaces to float upon a thin layer of lubricant oil. TinkSeal is different in that the base oil is only a carrier for the Nano lubricants and atomized particles. The carrier allows the Nano particles to be embedded in the mating surfaces and lower the friction between them. Therefor when the grease consistency eventually disappears, the Nano particles continue to lubricate the joining surfaces. The metal becomes a “treated surface” instead of a lubricated one.
 
TinkSeal is now used by many off road racing companies for things like engine assembly and the manufacturing/repair of shocks. Three different shock companies, including an aftermarket Harley Davidson shock manufacturer. I use it on my cnc machine collets to keep them from sticking. Spark plug threads and exhaust bolts I don't want to seize, get a nice coating. I had an old door that squeaked. No matter what I lubricated it with, it would always squeak again after awhile. I put TinkSeal on the pins, one at a time. Door actually swings nicer now, no noise.
 
· UTVengineering proprietary additive package
 
· Nano particle transfer system
 
· Plastic, Rubber and Viton Safe
 
· Non-drying formula, Constant Lubrication
 
· Low viscosity, high penetration
 
· Very low wash out performance
 
· Great on sliding parts, bushings and bearings
 
· Great on sliding gun parts, bushings, magazines
 
· White color, non-staining and allows wear indication
 
Patent Pending
 
TinkSeal is a registered Trademark **